2N Net Audio Decoder IP Audio System 914010E
  • 2N Net Audio Decoder IP Audio System 914010E
  • 2N Net Audio Decoder IP Audio System 914010E

2N Net Audio Encoder IP Audio System 914075E

€436.00
Tax included
Reference: VO2NNETST

IP device that can convert traditional (e.g. analogue) audio signal sources to IP form

Quantity
Delivery 4 - 5 Work Days

  • Security policy Security policy
  • Free delivery for order over € 300 Free delivery for order over € 300
  • Return policy Return policy
  • Payment with VISA, VISA Electron, MasterCard, Maestro Payment with VISA, VISA Electron, MasterCard, Maestro
  • Diners Club, American Express Diners Club, American Express

Datasheet:

Logic inputs 2, galvanically isolated, sensitive to contact or current from 5 to 48V
Relay output 1, galvanically isolated, NO and NC contact, load of max. 48V, 1A
Headphone output 3.5mm jack, stereo, output of 2 x 30mW, min. impedance of 16Ohm, DR 101dB, THD+N -85dB
Main microphone input symmetrical, XLR, integrated phantom power supply 24V, DR 88dB, THD+N -82dB
Microphone input for headset 3.5mm jack, integrated power supply for electret microphones, DR 84dB, THD+N -78dB
Line input 3.5mm jack, symmetrical mono or asymmetrical stereo, DR 93dB, THD+N -82dB
Power supply 12 to 32V, max. 1A | PoE in accordance with 802.3af standard
Audio stream PCM, 44 100KHz,16bit, Stereo (1650 kbps)
Dimensions 220 x 45 x 140mm
Operating temperature 0 - 40°C
Operating humidity 10-95% (non-condensing)

Advantages

  • Use of analogue music sources with a modern IP audio solution
  • Ability to use more than one audio signal source
  • Central management
  • Use of current LAN/WAN network
  • Simple and fast installation
  • Easy and comfortable operation

The 2N® Net Audio Encoder is an ideal solution, especially in cases where the customer is changing over, for example, from a 100V public address centre to a modern IP audio system, but there is a problem with the connection of current audio sources, which are not IP-compatible. The 2N® Net Audio Encoder is fully compatible with these sources and enables you to connect them to this new technology.

So, how does the 2N® Net Audio Encoder work? Each audio signal source is linked to a 2N® Net Audio Encoder, which transmits it over a LAN network. The audio signal is sent from traditional music sources over an IP network directly to the 2N® IP Audio Manager software application running on your computer/server. This application then distributes audio to pre-set destinations (e.g. a 2N® Net Audio Decoder IP audio system with a speaker, IP intercom, Cisco telephone, etc.). In addition, it enables you to create separate zones and play different message content in each of these areas.

VO2NNETST